Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Posted 3 Aug 2018 07:08 GMT-04:00 Geomechanics, Subsurface Flow, Structural Mechanics & Thermal Stresses Version 5.3 0 Replies
Please login with a confirmed email address before reporting spam
Hello everyone, I’m trying to model injrction of cold water from a well into an hot reservoir with COMSOL 5.3. I’m using the three modules Solid mechanics, darcy flow and heat transfer in posous media, coupling it with the multiphysics “Poroelasticity”, “Thermal expansion” and “Temperature coupling”. The problem is that it seems fluid and heat flow are not coupled, so the pressure disturbance and the temperature disturbance has different shapes. Someone could help me?
Hello Savino Depalo
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.