Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Magnetic fields : Coil error - solve in Coil Geometry Analysis step

Sanchayan Rajeetharan

Please login with a confirmed email address before reporting spam

Hei.

Im building a gradient coil for MRI. The model consists of many square coils. When im building it im getting an error " Numeric coil Coil 1 (coil1) not solved for. Solve it in a Coil Geometry Analysis step. "

any idea whats wrong.



2 Replies Last Post Jan 21, 2020, 5:21 a.m. EST
Mickaël Barsive COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago Jan 20, 2020, 8:08 a.m. EST

Hi,

As mentionned in the error message "Solve it in a Coil Geometry Analysis step. " you have to add a "Coil Geometry Analysis" step in your study before to solve the "Stationnary" step.

Right-click on "Study" node>"Study Steps">"Other">"Coil Geometry Analysis".

If you need further information, please contact support@comsol.com

Regards,

Mickaël

Hi, As mentionned in the error message "Solve it in a Coil Geometry Analysis step. " you have to add a "Coil Geometry Analysis" step in your study before to solve the "Stationnary" step. Right-click on "Study" node>"Study Steps">"Other">"Coil Geometry Analysis". If you need further information, please contact support@comsol.com Regards, Mickaël

Sanchayan Rajeetharan

Please login with a confirmed email address before reporting spam

Posted: 4 years ago Jan 21, 2020, 5:21 a.m. EST

Hi,

As mentionned in the error message "Solve it in a Coil Geometry Analysis step. " you have to add a "Coil Geometry Analysis" step in your study before to solve the "Stationnary" step.

Right-click on "Study" node>"Study Steps">"Other">"Coil Geometry Analysis".

If you need further information, please contact support@comsol.com

Regards,

Mickaël

thats the absolute . thanks.

>Hi, > >As mentionned in the error message "Solve it in a Coil Geometry Analysis step. " you have to add a "Coil Geometry Analysis" step in your study before to solve the "Stationnary" step. > >Right-click on "Study" node>"Study Steps">"Other">"Coil Geometry Analysis". > >If you need further information, please contact support@comsol.com > >Regards, > >Mickaël thats the absolute . thanks.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.