Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Elastoplastic Beam

Posted Feb 20, 2020, 1:42 p.m. EST Structural & Acoustics, Structural Mechanics 1 Reply

Enrico Borellini
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everone, I'd like model a elastoplastic behavier into beam, is there a way ? Because I want do the pushover analisys.

Thank you

1 Reply Last Post Feb 21, 2020, 2:02 a.m. EST
Henrik Sönnerlind COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 4 years ago Feb 21, 2020, 2:02 a.m. EST

Hi,

There is no elastoplastic material model in the Beam interface. You will have to use the Shell or Solid Mechanics interface in the parts of the structure where the stresses may exceed the yield limit. You can then make transitiond to beam modeling in the rest of the structure.

Regards,
Henrik

-------------------
Henrik Sönnerlind
COMSOL
Hi, There is no elastoplastic material model in the Beam interface. You will have to use the Shell or Solid Mechanics interface in the parts of the structure where the stresses may exceed the yield limit. You can then make transitiond to beam modeling in the rest of the structure. Regards, Henrik

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content