Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

eigenfrequency study of solid with membrane

Please login with a confirmed email address before reporting spam

Hi? I am using COMSOL 5.4 to draw the dispersion curve of the structure with membrane added to the solid. However, I am troubled by boundary conditions.

The model that I am trying to analyze is a combination of Membrane and Solid. This is the structure where the boundary of the membrane is attached to the solid model.

For the mode analysis of the membrane, the boundary condition of the membrane must be fixed or the displacement must be 0. In that case, however, the degrees of freedom of Solid are constrained by the boundary condition of the membrane, so I cannot see the modes I want in Solid.

I am trying to create an analytical model where the membrane boundary is exactly attached to the solid but not fixed( I mean, not global 0 displacement). Is it possible to implement this in COMSOL?

0 Replies Last Post 14 Apr 2020, 04:31 BST
COMSOL Moderator

Hello Junyoung Jang

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.