Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

pressure acoustic, frequency domain.

Please login with a confirmed email address before reporting spam

Hi

I'm using the pressure acoustic, freqency domain node to modeling the standing plane wave in an inviscid fluid. Frequency is 1.5 MHz, the speed of sound in the fluid is 1500 m/s, wavelength is 1000 um and my incident wave direction is along the z axis, so my block dimensions are 500 * 500 * 500 in 3D. When my component is 3D, operating the standing plane wave just depends on the dimention along the z axis (direction of the incident wave), but when my component is 2D, operating the standing plane wave pedends the both directions x-axis and y-axis , and actually it is just operated when my cube dimensions are 1000*500 (direction of the incident wave in 2D is along the y-axis). Why does this happen in two dimensions?

Tkank you.


0 Replies Last Post 9 Aug 2020, 15:39 GMT-4
COMSOL Moderator

Hello Azam Ranjbaran

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.