Remeshing in Frequency Bands for Acoustics
Application ID: 59041
This small tutorial shows how to set up a parametric sweep over a number of frequency bands (octaves or 1/3 octaves) and remesh once per band. A frequency sweep is performed within each band which now has an adequate mesh resolution. This approach saves some computational effort for the lower frequencies while not requiring remeshing for every single frequency, which can also be expensive.
Learn more in the related blog post: "How to Automate Meshing in Frequency Bands for Acoustic Simulation"
This model example illustrates applications of this type that would nominally be built using the following products:
however, additional products may be required to completely define and model it. Furthermore, this example may also be defined and modeled using components from the following product combinations:
The combination of COMSOL® products required to model your application depends on several factors and may include boundary conditions, material properties, physics interfaces, and part libraries. Particular functionality may be common to several products. To determine the right combination of products for your modeling needs, review the Specification Chart and make use of a free evaluation license. The COMSOL Sales and Support teams are available for answering any questions you may have regarding this.