Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Numerical Solutions for the Lévêque Problem of Boundary Layer  Mass or Heat Flux

E. Holzbecher
Weierstrass Institute for Applied Analysis and Stochastics (WIAS), Berlin, Germany

The Lévêque problem is an idealized simple situation concerning the influence of the boundary on the distribution of temperature or mass in Hagen-Poiseuille flow. Here, the performance of numerical solutions is examined for a range of Péclet numbers, spanning 11 orders of magnitude. We examine the Sherwood, resp. Nusselt numbers and confirm the cubic square rule for high flow ...

Comparison of Industrial Agitation for Batch Reacting Vessel Mixing in Bioethanol Fermentation

H. Rana [1],
[1] Loughborough University, United Kingdom

This paper presents the investigation into the phenomena during batch reactor vessel mixing comparing agitation equipment; the Rushton turbine and the Marine propeller; in the production of bioethanol by yeast fermentation. The key factors addressed in selecting equipment were fluid vector flow, energy dissipation resulting in shear damage to yeast cells, agitation power consumption, critical ...

Simulation of a Nozzle in a Borehole

E. Holzbecher [1], F. Sun [2],
[1] German University of Technology in Oman, Muscat, Oman, Germany
[2] Georg-August-Universität, Göttingen, Germany

In boreholes nozzles have to be found advantageous to increase the infiltration rate of water into the subsurface ground. Studies and practice in the field shows that the infiltration of water into permeable aquifers can be improved, if the flow in the borehole is modified. Due to the nozzle the flow regime turns from linear to turbulent. CFD studies help to understand the physics of the ...

Iterative Learning Control for Spatio-Temporal Repetitive Processes

D. Kowalów [1], M. Patan [1]
[1] Institute of Control & Computation Engineering, Zielona Góra, Poland

Recently, due to the dynamically increasing complexity of modern systems, a strong necessity appears for more systematic approaches to high quality control and process monitoring. Requirements imposed by process control in the area of spatio-temporal physical systems also called distributed parameter systems (DPSs) are associated with using very accurate models in which spatial dynamics cannot ...

Analysis and Optimization of Dragonfly Wing Using COMSOL Multiphysics® Software

A. Kumar [1], C. Kaur [1], S. S. Padhee [2],
[1] PEC University of Technology, Chandigarh, India
[2] IIT Ropar, Punjab, India

This paper explores the complexities of a dragonfly's flapping wing motion. It includes the literature as well as analytical results using simulations done in COMSOL Multiphysics® software. The study depicts the Fluid-Structure Interaction of the 2D wing (airfoil) with air, governed by Naiver-Stokes equations. The wing follows mathematical functions and is given motion similar to dragonfly's ...

Comparison Between Turbulent and Laminar Bubbly-Flow for Modeling H2/H2O Separation

E. Amores Vera[1], J. Rodríguez Ruiz[1]
[1]Centro Nacional del Hidrógeno, Puertollano, Spain

One of the most critical aspects on water electrolysis is gas-liquid separation, especially in systems with forced convection. The main problem of this kind of circulation is that a gas fraction could return to the electrolysis circuit. A suitable design of separator devices could be a solution in order to avoid a gas return to the electrolysis circuit. In this sense, the use of deflectors might ...

Finite Element Study of the Mass Transfer in Annular Reactor - new

Y. M. S. El-Shazly[1], S. W. Eletriby[1]
[1]Alexandria University, Alexandria, Alexandria, Egypt.

The annular reactor is a very useful design to carry many chemical reactions. In this study, COMSOL Multiphysics® software was used to study the isothermal mass transfer from the inner side of the outer tube of the annular reactor in the range of 200


徐佩锋 [1][2], 杨宁 [1],
[1] 江苏大学,镇江,江苏,中国
[2] 江苏农林职业技术学院,句容,江苏,中国

在 COMSOL Multiphysics® 中建立了平板膜组件模型,利用自由—多孔介质流和稀物质传递接口,通过对硅颗粒粒径和料液流速等操作参数及相互约束关系的设置,考察对渗透通量、膜表面处浓度等的影响,对硅颗粒悬浮液平板膜过滤中的浓差极化过程和膜组件的工作性能进行全面的仿真分析。并利用 COMSOL 中的函数、参数化扫描等后处理方式,实现了对仿真结果的可视化输出。仿真结果与实验数据较为一致,仿真模型可以作为真实设备的有效补充。

Steady and Unsteady Computational Results of Full Two Dimensional Governing Equations for Annular Internal Condensing Flows

R. Naik[1], S. Mitra[1], A. Narain[1], N. Shankar[1]
[1]Michigan Technological University, Houghton, MI, USA

This paper presents steady and unsteady computational results obtained from numerical solutions of the full two-dimensional governing equations for annular internal condensing flows in a channel. This is achieved by tracking the “sharp” interface while solving the flow fields using COMSOL Multiphysics® and MATLAB®. The unsteady wave simulation capability is used to predict heat-transfer rates ...

Simulation of Interstitial Nanoparticle Flow for Development of Tumor-On-A-Chip Device

J. Park [1], M. P. Vidal-Meza [1], R. Zhou [1], S. Barua [1], C. Wang [1],
[1] Missouri University of Science & Technology, Rolla, MO, USA

A simulation was performed to investigate the flow behaviors of drug delivery nanoparticles in a tumor-on-a-chip microfluidic device, which mimics a tumor cell having endothelial cells with micro-sized gaps. The Navier-Stokes equation and the convection-diffusion equation were used to model the flow field and the time-dependent particle distribution in the device, respectively. We investigated ...