Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Modeling of Packed Bed Reactors: Hydrogen Production by the Steam Reforming of Methane and Glycerol - new

A. Dixon[1], B. MacDonald[1], A. Olm[1]
[1]Department of Chemical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA

The conventional route to hydrogen production is by steam reforming of methane (MSR) in a multitubular packed bed. With the increasing use of biodiesel as a renewable fuel, interest has grown in steam reforming of the excess glycerol produced as a side product (GSR). We use COMSOL Multiphysics® software to model a tubular packed bed reactor, solving a single pellet model at each point. The ...

Modeling of Porous Catalyst Pellets: Comparison of Diffusion Flux Models for Steam Methane Reforming

P. L. Mills [1], L. Olabanji [1], A. Nagaraj [1], A. Nanduri [1],
[1] Department of Chemical and Natural Gas Engineering, Texas A&M University - Kingsville, Kingsville, TX, USA

Introduction Steam reforming of natural gas has been the most common method for producing synthesis gas (CO + H2) for the production of H2, MeOH and NH3 for over half a century [1]. Production of H2 in the USA using steam methane reforming (SMR) is ca. 9 MM tons/yr. Global production of NH3 using H2 derived from SMR was ca. 109 MM/yr in 2004. In the chemical industry, the SMR process is ...

Development of a User Interface for Design of SO2 Oxidation Fixed-Bed Reactors

A. Nagaraj [1], P. L. Mills [1],
[1] Texas A&M University - Kingsville, Kingsville, TX, USA

H2SO4 is a very important chemical commodity, and indeed, a nation’s H2SO4 production has been a reasonably good indicator of its industrial strength for the last century or so1,2. Nearly 350 MM tons of H2SO4 was produced in 20143.The demand for H2SO4 in United States exceeds the supply and hence to increase production, recycling and innovative clean technologies must be explored. From ...

Solid-Liquid Phase Change Simulation Applied to a Cylindrical Latent Heat Energy Storage System

D. Groulx[1], and W. Ogoh[1]

[1]Mechanical Engineering Department, Dalhousie University, Halifax, Nova Scotia, Canada

One way of storing thermal energy is through the use of latent heat energy storage systems. One such system, composed of a cylindrical container filled with paraffin wax, through which a copper pipe carrying hot water is inserted, is presented in this paper. It is shown that the physical processes encountered in the flow of water, the heat transfer by conduction and convection, and the phase ...

Claus Process Reactor Simulation

J. Plawsky[1],
[1]Rensselaer Polytechnic Institute, Troy, NY, USA

A model was developed to simulate the reaction, concentration field, flow field, and temperature distribution inside a Claus reactor for converting hydrogen sulfide to sulfur. The model considered two ideal reactors, a continuous stirred tank reactor and a plug flow reactor. As expected, two ideal reactors showed much different behaviors in terms of reactant conversion and operating ...

Simulating the Electrical Double Layer Capacitance

G. Zhang
Clemson University, Clemson, SC, USA

When a solid surface makes contact with a liquid medium, an electrical double layer (EDL) structure forms spontaneously through thermodynamic interaction between electrons and ions. In this study, we developed a computational model using commercial finite element analysis package COMSOL Multiphysics to simulate the double layer structure and quantify the EDL capacitance for the first time. In ...

The Effects of the Contact Angle on the Dynamics of Water Droplet Impingement

J. Hu [1], X. Huang [2], X. Xiong [1], K. T. Wan [2],
[1] University of Bridgeport, Bridgeport, CT, USA
[2] Northeastern University, Boston, MA, USA

INTRODUCTION The dynamic behavior of droplet impingement on a solid surface is important to many engineering applications, such as rain drops on automobile windshields, inkjet deposition and metal deposition in manufacturing processes, spray cooling of electronics, and spray coating for various applications. The droplet can spread, splash, and rebound after hitting a solid surface. Contact ...

Entropic Evaluation of Dean Flow Micromixers

P. S. Fodor[1], M. Kaufman[1]
[1]Cleveland State University, Cleveland, OH, USA

In this work we investigate computationally the use of spiral channels at Reynolds numbers from 25 to 900 as a mixing structure (Figure 1) using COMSOL Multiphysics, the CFD Module, and the Chemical Species Transport physics. In this system, the centrifugal forces experienced by the fluid as it travels along the curved trajectory induce counter-rotating flows. The presence of these transversal ...

Numerical Simulation of Concentration Polarization to Estimate Gypsum and Calcium Carbonate Scaling on Membrane Surfaces

A. Santafé-Moros[1], J.M. Gozálvez-Zafrilla[1]
[1]Institute for Industrial, Radiophysical and Environmental Safety (ISIRYM) - Universitat Politècnica de Valencia, Valencia, Spain

This paper shows a model to estimate the scaling parameters for reverse osmosis membrane processes. The model takes into account the concentration polarization of ionic species in the membrane channel of spiral-wound modules and the effect of the spacers on the flow. The scaling potential of calcium carbonate and sulfate carbonate (gypsum) salts were studied, as they are common sparingly salts ...

Acoustic Streaming Driven Mixing

N. Nama [1], P. Huang [1], F. Costanzo [1], T. J. Huang [1]
[1] Department of Engineering Science and Mechanics, Pennsylvania State University, PA, USA

Introduction - The ability to achieve rapid and homogeneous mixing at microscales is one of the essential requirements for various lab-on-a-chip applications [1]. The flow at microscales is characterized by low Reynolds number, resulting in laminar flow patterns. Thus, the mixing at microscales is dominated by slow diffusion process. Recently, an rapid and homogeneous mixing was demonstrated ...