COMSOL Multiphysics 5.5 fails to start on macOS 11Solution Number: 1282 Versions: 5.5
After upgrading to macOS 11, COMSOL Multiphysics 5.5 fails to launch. # Make sure you are running COMSOL Multiphysics 5.5 Update 3. From the COMSOL Multiphysics installation directory, go to the directory called ...
Running COMSOL Multiphysics in an IPv6 EnvironmentSolution Number: 1265 Applies to: COMSOL Multiphysics, COMSOL Server Versions: 5.4
When running COMSOL Multiphysics, COMSOL Server, or COMSOL Client in an Internet Protocol version 6 (IPv6) environment, some functionality may not work as expected unless you apply the software patches made available ...
Browse by CategoryError Messages (63)
Structural Mechanics (3)
Fluid Dynamics (1)
ALE / Parameterized Geometry (1)
Product Information (2)
User Models (1)
Learning Center ResourcesLearn how to use the COMSOL Multiphysics® software for modeling devices, designs, and processes. Access the Learning Center courses and articles below for modeling guidelines, step-by-step demonstrations, and exercise files.
Examples of the General Extrusion Operator
Examples of the General Projection Operator
Integrating Along Streamlines and Extracting Particle Statistics
Copying and Reusing Boundary Mode Analysis Results
Modeling TEM and Quasi-TEM Transmission Lines
Examples of the withsol Operator
Applying Translations, Scaling, Reflection, and Rotation via the Deformed Geometry and Moving Mesh Interfaces