Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to export data from COMSOL

Posted Feb 22, 2011, 5:53 p.m. EST Version 4.0a 1 Reply

Chao Zhao
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I was using COMSOL to simulate how fluid flow is affected by nanostructures. Now I'd like to export the velocity magnitudes from a constant x value and varying y value. I just can't find a way to do it and the help section was no help at all. Any help's appreciated. Thanks.
1 Reply Last Post Feb 23, 2011, 1:56 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 23, 2011, 1:56 a.m. EST
Hi

I mostly dump the values into a "table" and export from there

--
Good luck
Ivar
Hi I mostly dump the values into a "table" and export from there -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content