COMSOL Multiphysics®
  • Electrical
  • Mechanical
  • Fluid
  • Chemical
  • Multipurpose
  • Interfacing

Featured Videos


Duration: 1:02:53

Introducing New Features for Chemical Engineering in COMSOL® 5.3

In this archived webinar, learn about the new features in the Chemical Reaction Engineering, Batteries & Fuel Cells, Corrosion, Electrochemistry, and Electrodeposition modules for version 5.3 of { ...

Duration: 8:02

Creating a Graph with Two Y-Axes in COMSOL Multiphysics®

In the COMSOL Multiphysics® software, there might be times when you want to plot multiple values on a single graph. If the values you are plotting have different scales, you can add a second y-axis to ...

Duration: 21:56

18-Minute Introduction to RF Modeling in COMSOL Multiphysics®

In this 18-minute archived webinar, get an introduction to RF and microwave device modeling with the COMSOL Multiphysics® software. We demonstrate the model setup, including how to select physics, boundary ...

Duration: 21:22

Introduction to Design Optimization in COMSOL Multiphysics®

Watch this archived webinar for an 18-minute introduction to design optimization using the Optimization Module, an add-on to the COMSOL Multiphysics® software. You can use numerical simulation to improve ...

Duration: 14:57

Assigning Physics to a Model Geometry in COMSOL Multiphysics®

When creating a simulation, one of the most important steps you must complete is defining the physics. This includes choosing the appropriate physics for your model, adding physics conditions and ...

Duration: 45:20

New Particle Tracing Features in COMSOL Multiphysics® Version 5.3

In this archived webinar, learn about new features and functionality for the Particle Tracing Module in COMSOL® software version 5.3. Updates include new boundary conditions for modeling plane ...

Duration: 58:25

Teaching Electromagnetics Using COMSOL Multiphysics®

In this archived webinar, learn about using the COMSOL Multiphysics® software to teach electromagnetics.

Dr. Andriy Gorbach of the University of Bath shares his experience teaching postgraduate students ...

Duration: 59:23

Simulating Next-Generation Batteries in COMSOL Multiphysics®

Watch this archived webinar to learn about simulating next-generation batteries with the COMSOL Multiphysics® software and the add-on Batteries & Fuel Cells Module. We will discuss lithium-air, lithium ...

Duration: 39:51

Modeling Plasmas in COMSOL Multiphysics®

In this archived webinar, Jeff Crompton and Luke Gritter of AltaSim Technologies discuss modeling plasmas with the COMSOL Multiphysics® software and the Plasma Module.

Plasma modeling is useful in a ...

Duration: 56:18

Introducing New Structural Mechanics Features in COMSOL® 5.3

In this archived webinar, learn about the updated functionality for the Structural Mechanics Module and its add-on modules in version 5.3 of the COMSOL® software. Updates include safety factor ...

Duration: 48:58

Simulating Electroosmotic Flow with the Microfluidics Module

Watch this archived webinar to learn how to model electroosmotic flow, a useful skill for optimizing devices like micropumps and micromixers, with the COMSOL Multiphysics® software and add-on Microfluidics ...

Duration: 17:24

Introduction to LiveLink™ for Excel® in 18 Minutes

Watch this archived webinar for an 18-minute introduction to LiveLink™ for Excel®, an add-on product to the COMSOL Multiphysics® software.

You will learn the benefits of using LiveLink™ for Excel®, including the ability to ...

Duration: 49:19

Introducing New CFD Features in COMSOL Multiphysics® 5.3

In this archived webinar, learn about the new functionality in the CFD Module for COMSOL Multiphysics® version 5.3. Updates include a new v2-f turbulence model, an algebraic multigrid solver for CFD ...

Duration: 1:16:50

Introductory Video Series on How to Build Geometries in COMSOL®

This video series is an introduction to building a geometry using only the COMSOL Multiphysics® simulation software. Here, you will learn how to create 2D and 3D geometries, expand 2D geometries into 3D ...

Duration: 47:36

Introducing New Acoustics Features in COMSOL Multiphysics® 5.3

Watch this archived webinar to learn about the new functionality for modeling acoustics in COMSOL Multiphysics® version 5.3. Updates include improved functionality for simulating acoustics phenomena in the ...

First
Previous
1–15 of 268

Duration: 1:02:53

Introducing New Features for Chemical Engineering in COMSOL® 5.3

In this archived webinar, learn about the new features in the Chemical Reaction Engineering, Batteries & Fuel Cells, Corrosion, Electrochemistry, and Electrodeposition modules for version 5.3 of { ...

Duration: 8:02

Creating a Graph with Two Y-Axes in COMSOL Multiphysics®

In the COMSOL Multiphysics® software, there might be times when you want to plot multiple values on a single graph. If the values you are plotting have different scales, you can add a second y-axis to ...

Duration: 21:56

18-Minute Introduction to RF Modeling in COMSOL Multiphysics®

In this 18-minute archived webinar, get an introduction to RF and microwave device modeling with the COMSOL Multiphysics® software. We demonstrate the model setup, including how to select physics, boundary ...

Duration: 21:22

Introduction to Design Optimization in COMSOL Multiphysics®

Watch this archived webinar for an 18-minute introduction to design optimization using the Optimization Module, an add-on to the COMSOL Multiphysics® software. You can use numerical simulation to improve ...

Duration: 14:57

Assigning Physics to a Model Geometry in COMSOL Multiphysics®

When creating a simulation, one of the most important steps you must complete is defining the physics. This includes choosing the appropriate physics for your model, adding physics conditions and ...

Duration: 45:20

New Particle Tracing Features in COMSOL Multiphysics® Version 5.3

In this archived webinar, learn about new features and functionality for the Particle Tracing Module in COMSOL® software version 5.3. Updates include new boundary conditions for modeling plane ...

Duration: 58:25

Teaching Electromagnetics Using COMSOL Multiphysics®

In this archived webinar, learn about using the COMSOL Multiphysics® software to teach electromagnetics.

Dr. Andriy Gorbach of the University of Bath shares his experience teaching postgraduate students ...

Duration: 59:23

Simulating Next-Generation Batteries in COMSOL Multiphysics®

Watch this archived webinar to learn about simulating next-generation batteries with the COMSOL Multiphysics® software and the add-on Batteries & Fuel Cells Module. We will discuss lithium-air, lithium ...

Duration: 39:51

Modeling Plasmas in COMSOL Multiphysics®

In this archived webinar, Jeff Crompton and Luke Gritter of AltaSim Technologies discuss modeling plasmas with the COMSOL Multiphysics® software and the Plasma Module.

Plasma modeling is useful in a ...

Duration: 56:18

Introducing New Structural Mechanics Features in COMSOL® 5.3

In this archived webinar, learn about the updated functionality for the Structural Mechanics Module and its add-on modules in version 5.3 of the COMSOL® software. Updates include safety factor ...

Duration: 48:58

Simulating Electroosmotic Flow with the Microfluidics Module

Watch this archived webinar to learn how to model electroosmotic flow, a useful skill for optimizing devices like micropumps and micromixers, with the COMSOL Multiphysics® software and add-on Microfluidics ...

Duration: 17:24

Introduction to LiveLink™ for Excel® in 18 Minutes

Watch this archived webinar for an 18-minute introduction to LiveLink™ for Excel®, an add-on product to the COMSOL Multiphysics® software.

You will learn the benefits of using LiveLink™ for Excel®, including the ability to ...

Duration: 49:19

Introducing New CFD Features in COMSOL Multiphysics® 5.3

In this archived webinar, learn about the new functionality in the CFD Module for COMSOL Multiphysics® version 5.3. Updates include a new v2-f turbulence model, an algebraic multigrid solver for CFD ...

Duration: 1:16:50

Introductory Video Series on How to Build Geometries in COMSOL®

This video series is an introduction to building a geometry using only the COMSOL Multiphysics® simulation software. Here, you will learn how to create 2D and 3D geometries, expand 2D geometries into 3D ...

Duration: 47:36

Introducing New Acoustics Features in COMSOL Multiphysics® 5.3

Watch this archived webinar to learn about the new functionality for modeling acoustics in COMSOL Multiphysics® version 5.3. Updates include improved functionality for simulating acoustics phenomena in the ...

Duration: 1:02:53

Introducing New Features for Chemical Engineering in COMSOL® 5.3

In this archived webinar, learn about the new features in the Chemical Reaction Engineering, Batteries & Fuel Cells, Corrosion, Electrochemistry, and Electrodeposition modules for version 5.3 of { ...

Duration: 8:02

Creating a Graph with Two Y-Axes in COMSOL Multiphysics®

In the COMSOL Multiphysics® software, there might be times when you want to plot multiple values on a single graph. If the values you are plotting have different scales, you can add a second y-axis to ...

Duration: 21:56

18-Minute Introduction to RF Modeling in COMSOL Multiphysics®

In this 18-minute archived webinar, get an introduction to RF and microwave device modeling with the COMSOL Multiphysics® software. We demonstrate the model setup, including how to select physics, boundary ...

Duration: 21:22

Introduction to Design Optimization in COMSOL Multiphysics®

Watch this archived webinar for an 18-minute introduction to design optimization using the Optimization Module, an add-on to the COMSOL Multiphysics® software. You can use numerical simulation to improve ...

Duration: 14:57

Assigning Physics to a Model Geometry in COMSOL Multiphysics®

When creating a simulation, one of the most important steps you must complete is defining the physics. This includes choosing the appropriate physics for your model, adding physics conditions and ...

Duration: 45:20

New Particle Tracing Features in COMSOL Multiphysics® Version 5.3

In this archived webinar, learn about new features and functionality for the Particle Tracing Module in COMSOL® software version 5.3. Updates include new boundary conditions for modeling plane ...

Duration: 58:25

Teaching Electromagnetics Using COMSOL Multiphysics®

In this archived webinar, learn about using the COMSOL Multiphysics® software to teach electromagnetics.

Dr. Andriy Gorbach of the University of Bath shares his experience teaching postgraduate students ...

Duration: 59:23

Simulating Next-Generation Batteries in COMSOL Multiphysics®

Watch this archived webinar to learn about simulating next-generation batteries with the COMSOL Multiphysics® software and the add-on Batteries & Fuel Cells Module. We will discuss lithium-air, lithium ...

Duration: 39:51

Modeling Plasmas in COMSOL Multiphysics®

In this archived webinar, Jeff Crompton and Luke Gritter of AltaSim Technologies discuss modeling plasmas with the COMSOL Multiphysics® software and the Plasma Module.

Plasma modeling is useful in a ...

Duration: 56:18

Introducing New Structural Mechanics Features in COMSOL® 5.3

In this archived webinar, learn about the updated functionality for the Structural Mechanics Module and its add-on modules in version 5.3 of the COMSOL® software. Updates include safety factor ...

Duration: 48:58

Simulating Electroosmotic Flow with the Microfluidics Module

Watch this archived webinar to learn how to model electroosmotic flow, a useful skill for optimizing devices like micropumps and micromixers, with the COMSOL Multiphysics® software and add-on Microfluidics ...

Duration: 17:24

Introduction to LiveLink™ for Excel® in 18 Minutes

Watch this archived webinar for an 18-minute introduction to LiveLink™ for Excel®, an add-on product to the COMSOL Multiphysics® software.

You will learn the benefits of using LiveLink™ for Excel®, including the ability to ...

Duration: 49:19

Introducing New CFD Features in COMSOL Multiphysics® 5.3

In this archived webinar, learn about the new functionality in the CFD Module for COMSOL Multiphysics® version 5.3. Updates include a new v2-f turbulence model, an algebraic multigrid solver for CFD ...

Duration: 1:16:50

Introductory Video Series on How to Build Geometries in COMSOL®

This video series is an introduction to building a geometry using only the COMSOL Multiphysics® simulation software. Here, you will learn how to create 2D and 3D geometries, expand 2D geometries into 3D ...

Duration: 47:36

Introducing New Acoustics Features in COMSOL Multiphysics® 5.3

Watch this archived webinar to learn about the new functionality for modeling acoustics in COMSOL Multiphysics® version 5.3. Updates include improved functionality for simulating acoustics phenomena in the ...

First
Previous
1–15 of 268