Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
measuring magnetic flux density in tesla
Posted Nov 3, 2011, 12:32 p.m. EDT 1 Reply
Please login with a confirmed email address before reporting spam
hi
i have a small magnet.(16*5*3)mm and I measured the magnetic flux density using a sensor across the 16 mm direction.I get a trapezoidal kind of a graph.
how to simulate this phenomena in comsol.
i have a small magnet.(16*5*3)mm and I measured the magnetic flux density using a sensor across the 16 mm direction.I get a trapezoidal kind of a graph.
how to simulate this phenomena in comsol.
1 Reply Last Post Nov 4, 2011, 3:15 a.m. EDT
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
Your sensor is probaly integration the flux over its size, so try to add a moving integration section, it's a bit of math tweaking, but I'm sure you find out
--
Good luck
Ivar
Your sensor is probaly integration the flux over its size, so try to add a moving integration section, it's a bit of math tweaking, but I'm sure you find out
--
Good luck
Ivar