Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Boundary conditions

Posted Feb 16, 2012, 8:59 a.m. EST Heat Transfer & Phase Change, Geometry, Modeling Tools & Definitions, Parameters, Variables, & Functions 1 Reply

Marie Seltveit Haugen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I was looking for the boundary conditions reradiating surface and surface-to-surface radiation, but I coulden't find them. I was looking in heat transfer module, but all I could use was surface-to-ambient radiation. I am using version 4.2 classkit lisence. Is it possible that I have a reduced version of it?
1 Reply Last Post Feb 16, 2012, 10:57 a.m. EST
Nagi Elabbasi Facebook Reality Labs
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Feb 16, 2012, 10:57 a.m. EST
I am not familiar with the classkit license, but in general surface-to-surface radiation requires a license to the Heat Transfer module. Also it will only show up as an option in the popup menu of the heat transfer node if “surface-to-surface radiation” is selected (from the Settings window of the heat transfer node).

Nagi Elabbasi
Veryst Engineering
I am not familiar with the classkit license, but in general surface-to-surface radiation requires a license to the Heat Transfer module. Also it will only show up as an option in the popup menu of the heat transfer node if “surface-to-surface radiation” is selected (from the Settings window of the heat transfer node). Nagi Elabbasi Veryst Engineering

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content