heat transfer time transient analysis results are not smooth.

Please login with a confirmed email address before reporting spam

hello.

I am using COMSOL to perform a time dependent analysis and I am facing a situation where the resulting values over time do not converge (smooth continuous values).

The analysis is to calculate the temperature through Joule heating in a simple structure and I need to get a continuous and smooth value with respect to time. Even with a very small time interval, a few microseconds, the calculation shows a discontinuous change in slope at certain points as follows.

Is there any way to prevent this from happening with the time dependent solver option?

Thanks.

i uploaded (mash-deleted) model file. and you may check the graph image of transient temperature image from : ,,,

https://drive.google.com/file/d/1-1vwWjPE7z24-BxKagzqldwba9j11e3r/view?usp=sharing

,,,,

https://drive.google.com/file/d/1IhpdtN4fqCT-1m8jhsnLi8Z9ysAX_iRD/view?usp=sharing



Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.