COMSOL Multiphysics®
  • Electrical
  • Mechanical
  • Fluid
  • Chemical
  • Multipurpose
  • Interfacing

Featured Videos

Clear All

Duration: 12:13

Simulating a Closing Gate Valve Part 2

This tutorial shows step-by-step how to simulate a 3D gate valve which closes completely and redirects pipe flow to a different branch in a Y-fitting. We utilize COMSOL's ability to handle very ...

Duration: 13:18

Simulating a Closing Gate Valve Part 1

This tutorial shows step-by-step how to simulate a 3D gate valve which closes completely and redirects pipe flow to a different branch in a Y-fitting. We utilize COMSOL's ability to handle very ...

Duration: 6:10

Contaminant Plume with Particle Tracing Part 1

This tutorial shows step-by-step how to simulate the motion of a plume of dust particles as they are carried down an office hallway, pass into a 10x10 office, and out through open windows. It ...

Duration: 8:01

Contaminant Plume with Particle Tracing Part 2

This tutorial shows step-by-step how to simulate the motion of a plume of dust particles as they are carried down an office hallway, pass into a 10x10 office, and out through open windows. It ...

Duration: 2:42

Modeling Computational Electromagnetics with the AC/DC Module

With COMSOL Multiphysics® and the AC/DC Module you can model static and low-frequency computational electromagnetics. By simulating electric, magnetic, and electromagnetic fields in static and ...

Duration: 6:42

Modeling Stresses and Strains in COMSOL Multiphysics

Studying how your product behaves under a mechanical load is one of the most critical steps in the design process. In this step-by-step instructional video, you will learn how the Solid Mechanics ...

Duration: 8:29

Modeling the Focusing Stage of an Electrokinetic Valve

In this video, we simulate an electrokinetic valve. Using the Transport of Diluted Species, Creeping Flow, and Electric Currents interfaces, this video shows the complete analysis of a typical ...

Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 12:37

Heat Transfer in an Oil Quench Simulation

In this oil quench simulation video, Certified Consultant AltaSim Technologies demonstrates how to use COMSOL Multiphysics to investigate the effect of fluid flow rate on the quenching of a hot ...

Duration: 3:35

Joule Heating in a Fuse on a Circuit Board, Chapter 3

Multiphysics modeling of resistive heating in a fuse on a circuit board. Chapter 3 shows how you can use temperature-dependent material properties. Watch chapter 1: Building the model and adding ...

Duration: 8:24

Inductive Heating of a Billet Tutorial

Inductive heating is common in the steel industry. The model shown in the video concerns the re-heating of a billet traveling through a coil. Frequency domain modeling of the magnetic fields is ...

Duration: 5:40

Joule Heating in a Fuse on a Circuit Board, Chapter 1

This is the first video in a 3-part demo on multiphysics modeling of resistive heating in an aluminum fuse. Chapter 1 demonstrates how to build the model and add materials. Watch chapter 2: Adding ...

Duration: 7:00

Joule Heating in a Fuse on a Circuit Board, Chapter 2

Multiphysics modeling of resistive heating in an aluminum fuse on a circuit board. In this second chapter of a 3-part demo you will learn how to add physics and solve the model. Watch chapter 3: ...

Duration: 12:13

Simulating a Closing Gate Valve Part 2

This tutorial shows step-by-step how to simulate a 3D gate valve which closes completely and redirects pipe flow to a different branch in a Y-fitting. We utilize COMSOL's ability to handle very ...

Duration: 13:18

Simulating a Closing Gate Valve Part 1

This tutorial shows step-by-step how to simulate a 3D gate valve which closes completely and redirects pipe flow to a different branch in a Y-fitting. We utilize COMSOL's ability to handle very ...

Duration: 6:10

Contaminant Plume with Particle Tracing Part 1

This tutorial shows step-by-step how to simulate the motion of a plume of dust particles as they are carried down an office hallway, pass into a 10x10 office, and out through open windows. It ...

Duration: 8:01

Contaminant Plume with Particle Tracing Part 2

This tutorial shows step-by-step how to simulate the motion of a plume of dust particles as they are carried down an office hallway, pass into a 10x10 office, and out through open windows. It ...

Duration: 2:42

Modeling Computational Electromagnetics with the AC/DC Module

With COMSOL Multiphysics® and the AC/DC Module you can model static and low-frequency computational electromagnetics. By simulating electric, magnetic, and electromagnetic fields in static and transient ...

Duration: 6:42

Modeling Stresses and Strains in COMSOL Multiphysics

Studying how your product behaves under a mechanical load is one of the most critical steps in the design process. In this step-by-step instructional video, you will learn how the Solid Mechanics ...

Duration: 8:29

Modeling the Focusing Stage of an Electrokinetic Valve

In this video, we simulate an electrokinetic valve. Using the Transport of Diluted Species, Creeping Flow, and Electric Currents interfaces, this video shows the complete analysis of a typical ...

Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 12:37

Heat Transfer in an Oil Quench Simulation

In this oil quench simulation video, Certified Consultant AltaSim Technologies demonstrates how to use COMSOL Multiphysics to investigate the effect of fluid flow rate on the quenching of a hot ...

Duration: 3:35

Joule Heating in a Fuse on a Circuit Board, Chapter 3

Multiphysics modeling of resistive heating in a fuse on a circuit board. Chapter 3 shows how you can use temperature-dependent material properties.

Watch chapter 1: Building the model and adding ...

Duration: 8:24

Inductive Heating of a Billet Tutorial

Inductive heating is common in the steel industry. The model shown in the video concerns the re-heating of a billet traveling through a coil. Frequency domain modeling of the magnetic fields is ...

Duration: 5:40

Joule Heating in a Fuse on a Circuit Board, Chapter 1

This is the first video in a 3-part demo on multiphysics modeling of resistive heating in an aluminum fuse. Chapter 1 demonstrates how to build the model and add materials.

Watch chapter 2: Adding ...

Duration: 7:00

Joule Heating in a Fuse on a Circuit Board, Chapter 2

Multiphysics modeling of resistive heating in an aluminum fuse on a circuit board. In this second chapter of a 3-part demo you will learn how to add physics and solve the model.

Watch chapter 3: ...

Duration: 12:13

Simulating a Closing Gate Valve Part 2

This tutorial shows step-by-step how to simulate a 3D gate valve which closes completely and redirects pipe flow to a different branch in a Y-fitting. We utilize COMSOL's ability to handle very ...

Duration: 13:18

Simulating a Closing Gate Valve Part 1

This tutorial shows step-by-step how to simulate a 3D gate valve which closes completely and redirects pipe flow to a different branch in a Y-fitting. We utilize COMSOL's ability to handle very ...

Duration: 6:10

Contaminant Plume with Particle Tracing Part 1

This tutorial shows step-by-step how to simulate the motion of a plume of dust particles as they are carried down an office hallway, pass into a 10x10 office, and out through open windows. It ...

Duration: 8:01

Contaminant Plume with Particle Tracing Part 2

This tutorial shows step-by-step how to simulate the motion of a plume of dust particles as they are carried down an office hallway, pass into a 10x10 office, and out through open windows. It ...

Duration: 2:42

Modeling Computational Electromagnetics with the AC/DC Module

With COMSOL Multiphysics® and the AC/DC Module you can model static and low-frequency computational electromagnetics. By simulating electric, magnetic, and electromagnetic fields in static and transient ...

Duration: 6:42

Modeling Stresses and Strains in COMSOL Multiphysics

Studying how your product behaves under a mechanical load is one of the most critical steps in the design process. In this step-by-step instructional video, you will learn how the Solid Mechanics ...

Duration: 8:29

Modeling the Focusing Stage of an Electrokinetic Valve

In this video, we simulate an electrokinetic valve. Using the Transport of Diluted Species, Creeping Flow, and Electric Currents interfaces, this video shows the complete analysis of a typical ...

Duration: 9:46

Modeling the Injection Stage of an Electrokinetic Valve

This video shows the second stage of an electrokinetic valve simulation, modeling the injection stage. The video demonstrates how to model a complete analysis of a typical microfluidic valve design ...

Duration: 9:40

Thermal-Structure Interaction in a MEMS Energy Harvester

In this video, AltaSim Technologies shows you how to simulate Thermal-Structure Interaction in a MEMS energy harvester, using COMSOL Multiphysics. The MEMS energy harvester model shown here includes ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 12:37

Heat Transfer in an Oil Quench Simulation

In this oil quench simulation video, Certified Consultant AltaSim Technologies demonstrates how to use COMSOL Multiphysics to investigate the effect of fluid flow rate on the quenching of a hot ...

Duration: 3:35

Joule Heating in a Fuse on a Circuit Board, Chapter 3

Multiphysics modeling of resistive heating in a fuse on a circuit board. Chapter 3 shows how you can use temperature-dependent material properties.

Watch chapter 1: Building the model and adding ...

Duration: 8:24

Inductive Heating of a Billet Tutorial

Inductive heating is common in the steel industry. The model shown in the video concerns the re-heating of a billet traveling through a coil. Frequency domain modeling of the magnetic fields is ...

Duration: 5:40

Joule Heating in a Fuse on a Circuit Board, Chapter 1

This is the first video in a 3-part demo on multiphysics modeling of resistive heating in an aluminum fuse. Chapter 1 demonstrates how to build the model and add materials.

Watch chapter 2: Adding ...

Duration: 7:00

Joule Heating in a Fuse on a Circuit Board, Chapter 2

Multiphysics modeling of resistive heating in an aluminum fuse on a circuit board. In this second chapter of a 3-part demo you will learn how to add physics and solve the model.

Watch chapter 3: ...